ZABER T-LST0500A MOTORIZED LINEAR STAGE BUILT IN CONTROLLER 500MM TRAVEL

Description

This Sale Is For A Laboratory Surplus Zaber Model T-LST0500A Motorized Linear Stage With Built In Controller.
This stage was removed from a decommissioned piece of research laboratory equipment with very few hours of use. It is guaranteed to be in excellent operational condition. Current retail price for this model is ,616.00! Buyer to pay calculated shipping via UPS Ground.
Local Pick-Up here in Rancho Cordova, CA is welcome.
If you have any questions you can call me by following these directions to get my number from eBay: On the right side of this page under "seller information" click on the blue “contact seller”. Then under "select a topic" click on the circle next to “Other”. Next click on the blue “view phone number”
Manufacturers specifications:
Microstep Size (Default Resolution) 0.124023438 µm
Built-in Controller Yes
Travel Range 500 mm 19.685 "
Accuracy (unidirectional) 125 µm 0.004921 "
Repeatability < 2 µm < 0.000079 " Backlash < 5 µm < 0.000197 "
Maximum Speed 22 mm/s 0.866 "/s Minimum Speed 0.000076 mm/s 0.000003 "/s
Speed Resolution 0.000076 mm/s 0.000003 "/s
Encoder Type None
Peak Thrust 700 N 157.0 lb
Maximum Continuous Thrust 560 N 125.6 lb
Communication Interface RS-232
Communication Protocol Zaber ASCII, Zaber Binary (Default)
Maximum Centered Load 1000 N 224.3 lb
Maximum Cantilever Load 3000 N⋅cm 4248.4 oz⋅in
Guide Type Roller bearing
Vertical Runout < 13 µm < 0.000512 "
Horizontal Runout < 13 µm < 0.000512 "
Pitch 0.10 ° 1.745 mrad
Roll 0.08 ° 1.396 mrad
Yaw 0.05 ° 0.873 mrad
Maximum Current Draw 1200 mA
Power Supply 12-48 VDC
Power Plug Molex Mini-Fit Jr. 3pin
Linear Motion Per Motor Rev 1.5875 mm 0.062 "
Motor Steps Per Rev 200
Motor Type Stepper (2 phase)
Motor Rated Current 2100 mA/phase Inductance 6.4 mH/phase
Default Resolution 1/64 of a step
Data Cable Connection Minidin 6 M/F
Mechanical Drive System Precision lead screw
Limit or Home Sensing Magnetic home sensor
Manual Control Indexed knob with push switch
Axes of Motion 1
LED Indicators Yes
Mounting Interface M6 and M3 threaded holes
Operating Temperature Range 0 to 50 °C
Vacuum Compatible No
RoHS Compliant Yes
CE Compliant Yes
Weight 4.98 kg 10.979 lb