Maxitrol RV48L Liquid Propane Pressure Regulator, 3/4" FPT Thread, 1" In and ...

Description

Brand New Maxitrol RV48L Liquid Propane Pressure Regulator, 3/4" FPT Thread, 1" In and Out Opening, 1/2 PSIG In, 5"-12" WC Out
Manufacturer model:
RV48L-66-0033
GAS TYPE & PRESSURE - Gas Type: Propane Gas (LP). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 5" - 12" Water Column
PIPE THREAD SIZE - 3/4" Inlet & 3/4" Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as close to 1-1/16 inch as shown in the pictures table.
CAUTION - This regulator has 1-1/16" openings for 3/4" gas pipes. The 3/4" gas pipe means interior diameter 3/4" but outside diameter is 1-1/16", refer to the pictures before buying.
MARKING - Model: RV48L, Marking: 1/2 PSIG, Po 5" - 12". Inlet pressure 1/2 PSI. Adjustable outlet pressure 5"-12" Water Column.
OPERATE TEMPERATURE - 32F - 225F (0C - 107C). Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulator.
Description
Style:
3/4" Propane Gas (LP)
Maxitrol Pressure Regulator for Propane Gas (LP)
Product Description:
Brand: Maxitrol
Gas type: Propane Gas (LP)
Refer to the pictures on how to find the correct pipe thread size. This regulator has 1-1/16" openings for 3/4" gas pipes. 3/4" IN and 3/4" OUT Female Pipe Thread. The 3/4" gas pipe means interior diameter 3/4" but outside diameter is 1-1/16", refer to the pictures before buying.
Inlet pressure (CSA rated and Maximum operating): 1/2 PSI (34 mbar).
Outlet pressure range: 5” - 12” Water Column
Ambient operating temperature range: 32°F - 225°F (0°C - 107°C).
Attention:
NOTE: GAS PRESSURE REGULATORS WILL NOT TURN OFF THE FLOW OF GAS.
CAUTION: Never connect regulator directly to the propane supply source. Maxitrol regulators require an external regulator (NOT supplied). Install the external regulator between the propane supply source and Maxitrol regulator.
Install the regulator properly with gas flowing as indicated by the arrow on the casting.
*NOTE - Do not install the regulator too close to the heating equipment or use in very cold environment.
How to find the correct pipe thread size
WARNING: The NPT thread size is NOT referring to the size of the thread itself!
The plumbing industry standard for the pipe sizes is NOT always as straightforward as measuring the pipe.
Measuring the pipe will often mislead you into choosing the wrong pipe size.
The "pipe thread size" is measured and based on the inside of the pipe.
A lot of people measured the thread / the opening for the thread / outside diameter of the pipe, and thought that was the thread size. It was WRONG.
Shipping and Handling
Please allow 5-7 business days for the package to arrive, regardless of buyer location within the US.
We will provide an online tracking number to you once the item has been shipped.
It may take a few business days for our automated system to process the tracking number onto eBay. However, this will not affect the shipping times.
Return Policy
All our products are brand new and sealed. All items qualify for returns within 30 days of receipt.
Feedback
We take our reputation seriously. If you have any questions or concerns, please contact us and we will respond back to your message within 24 hours.