Edelbrock 1406 Performer 600 CFM 4 Barrel Carburetor, Electric Choke

Description

Recommended only for stock to Performer level applications, Delivers smooth throttle response throughout the power band, Includes both timed and full vacuum ports for ignition advance, Features easy to tune with great drivability and an electric choke, Specifically designed for small-block and small displacement big-block engines
Edelbrock 1406 Performer 600 CFM 4 Barrel Carburetor, Electric Choke
Sku # 3251406
Mfr. Part # 1406
Condition
New
Brand
Edelbrock
Sold
Each
Details
Notes
Comes with:
Metering Jets - Primary .098, Secondary .095
Metering Rods - .075 x .047
Step-Up Spring - yellow (4" Hg)
Electric choke
Bolt-on-and-run performance right out of the box
Smooth throttle response throughout the power band
Lightweight all-aluminum body is compatible with gasohol and blended fuels
Includes both timed and full vacuum ports for ignition advance
Uses metering rods to transition between circuits - rods can be changed in seconds without carburetor removal or draining fuel
Float levels are factory set; adjustments are rarely needed
Change jets, adjust floats & replace needles/seats without draining fuel or removing carb
Two-piece design means no gaskets below the fuel level for leak-free operation
Info
Edelbrock Performer Series 4 barrel carbs have proven themselves to be easy to tune with great drivability. Whether you need to replace an aging stock carb or are looking for a performance carb to top off your hot rod, this Edelbrock carb is the best choice for performance and value. All Edelbrock products are proudly made in the U.S.A.
CALIBRATED FOR FUEL ECONOMY
Designed for small-block and small displacement big-block engines, this four barrel carb is recommended only for stock to Performer level applications. They are not recommended for use on RPM or Torker II intake manifolds. Match with an Edelbrock Performer or Performer EPS manifold and other brands of similar design. Calibrated 2% leaner than #1405. Includes both timed and full vacuum ports for ignition advance. Comes with: Metering Jets Primary .098, Secondary .095; Metering Rods .075 x .047; Step-Up Spring yellow (4" Hg). Includes an electric choke and detailed instructions. Ford/Mopar throttle adapter arms sold separately.
Easy to tune with great driveability
600 CFM
Electric choke
Ford/Mopar arms sold separately
Charts
(PDF)
WARNING: Cancer and Reproductive Harm -- p65Warnings.ca.gov
California Customers: This part has been identified as emissions sensitive and can only legally be installed on race-use only vehicles, off-road-use only vehicles, or pre-1965 vehicles in the State of California in accordance with the California Air Resource Board (CARB) requirements. Once your order is placed you will be contacted by Speedway Motors within 2 business days so that you can certify that you will only use such parts on these types of vehicles in California.
Specs
Material Type
Aluminum
Sold in Quantity
Each
Finish
Satin
Color
Silver
CFM
600 CFM
Fuel Type
Gasoline
Carburetor Barrels
4-Barrel
Fuel Inlet Type
Single
Choke Type
Electric
Carburetor Flange Type
4-Barrel Square Bore
Secondary Type
Air Valve
New or Remanufactured
New
Notes
3-1/4" from bottom of carb base to the base of the carb neck. Mounting bolt hole pattern is 5-1/8" by 5-5/8".
MFG. Part #
1406
Gasket(s) Included
Yes
Overall Height
4.35
GTIN Code
085347014064
CFM Range
600-699 CFM
Bolt Hole Pattern
5.160" x 5.625"
Reviews
Yes and would recommend to friends
Rated
by Nick on May 12, 2021
Summary:
Runs great on my hot rod
Yes, I recommend this product.
Yes I would buy this product again
Rated
by ANNABELLE FARMS on May 10, 2021
Summary:
WORKED RIGHT OUT OF THE BOX VERY AWESOME PRODUCT
Yes, I recommend this product.
I would purchase this product again & again.
Rated
by Michael the Motivator on April 22, 2021
Summary:
I purchased it for my 1963 Mercury Comet S22. It provides excellent performance and dresses up my engine.
Yes, I recommend this product.
Great carburetor
Rated
by Tri5mann on April 21, 2021
Summary:
Just a bolt on and go carburetor it looks good to.
Easy to set up
Rated
by Rusty on April 13, 2021
Summary:
Easy to set up
Yes, I recommend this product.
Related Items / Suggested Parts
Edelbrock 1487 Performer Carburetor Calibration Kit, 1406
Edelbrock 14063 Performer 600 CFM 4 Barrel Carb, Electric Choke, Black
Lokar TCB-40DQ1 Edelbrock Throttle Cable Bracket/Springs, Progressive
Lokar XTCB-40DQ1 Black Edelbrock Thottle Cable Bracket/Springs
Edelbrock 2696 Performer Series Carburetor Adapter, 0.850 Inch
Edelbrock 2697 Performer Series Carburetor Adapter, 0.850 Inch
Edelbrock 8126 Performer Carb Fuel Line Kit, 3/8 Inch Hose Barb Inlet
Edelbrock 1477 Performer Carburetor Rebuild Kit
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.